Polymarket has no native stop-loss or take-profit order: the exchange accepts limit orders (GTC and GTD) and market orders (FOK and FAK), and nothing that waits for a trigger price. A take-profit is easy to build from a resting limit sell. A stop-loss is not, because a sell order priced below the market fills right away. To exit on the way down you need software that watches the book and sends a sell when your level breaks, and you need to know the cases where even that will not save you.
What the order book gives you for an exit
Every exit on Polymarket is a sell of the outcome shares you hold, matched against someone's bid on the central limit order book. Polymarket's trading docs list four ways an order can behave:
| Type | What the docs say it does | Use in an exit plan |
|---|---|---|
| GTC (Good Till Cancelled) | Rests on the book until it fills or you cancel it | Take-profit with no deadline |
| GTD (Good Till Date) | Rests until an expiration time you set | Take-profit that should be gone before a known event |
| FAK (Fill and Kill) | Fills what liquidity is there now, cancels the rest | The sell a stop-loss watcher sends |
| FOK (Fill or Kill) | Fills the whole order now or none of it | Rarely right for a stop; a partial exit beats no exit |
| Post-only (flag on GTC/GTD) | Rejected if it would match immediately | Guarantees a take-profit rests as a maker order |
What is missing is anything conditional. There is no "sell if the bid drops to 30 cents" order, no trailing stop and no one-cancels-the-other pair. You can sell all or part of a position by hand; anything automatic is up to you or a tool you trust. If bids, asks and the spread are new to you, start with our Polymarket order book explained.
Take-profit: a resting sell does the job
A take-profit is just a limit sell above the current price, left on the book. Say you bought 200 Yes shares at $0.40, which cost $80. You place a GTC sell for 200 shares at $0.60. Nothing happens until a buyer is willing to pay 60 cents. If the order fills in full, you receive $120 and the trade made $40.
Because the order rests on the book and someone else's order matches into it, you are the maker. Polymarket's fee page is direct about this: makers are never charged fees, only takers pay. A take-profit that rests is the cheapest exit you can make. Adding the post-only flag means that if the price has already jumped past your level when you place the order, it is rejected rather than turned into a taker sale at a worse price than you could have had.
GTC or GTD?
Use GTC when the target holds until resolution. Use GTD when it should disappear before a known moment, such as a debate or the start of a game. Two details from the docs matter here. A GTD order expires one minute before the time you set, as a security threshold, so the docs say to set now + 60 + N for an effective life of N seconds. And the expiration has to be at least three minutes in the future, so the shortest useful GTD order lives for about two minutes.
The shares are locked while the order rests
This is the detail that shapes everything below. The order lifecycle page gives the rule for how large an order can be: your balance minus whatever is already reserved by open orders. For a sell, the balance is your outcome shares. If all 200 shares sit in a take-profit order, you have zero shares available for anything else. A stop-loss sell for the same shares will be rejected until the take-profit is cancelled.
So any automatic stop has to do two things in order: cancel the resting take-profit, then send the sell. If the take-profit filled partly in the meantime, only the unfilled part can be cancelled, and the stop should only try to sell what you still hold.
Stop-loss: why a resting order cannot do it
The obvious workaround is to place a sell at your stop price and leave it. It does not work. The docs define a marketable sell as one whose price is at or below the highest bid. If the best bid is $0.38 and you place a sell at $0.30 thinking of it as a stop, your order is marketable the moment it arrives. It matches against the bids that are there, starting at $0.38, and you have sold now, not at 30 cents later.
A stop on Polymarket is therefore a program, not an order. Something has to watch the market, decide that the level broke, and then send a sell. That gives you three decisions to make.
What price triggers it
The price shown on Polymarket is the midpoint between the best bid and the best ask, unless the spread is wider than $0.10, in which case the last traded price is shown instead. Neither is what you would receive. When you sell, you hit the bid. A stop that triggers on the midpoint can fire late in a wide market, and one that triggers on the last trade can fire on a single odd print. For a sell, we prefer to trigger on the best bid, sometimes with a check that the level held for a few seconds so one thin bid does not set it off.
How the sell is sent
A FAK market sell with a minimum price is the usual choice. It takes what the book offers down to your floor and cancels the rest. A FOK sell can leave you holding everything because the book could not absorb the whole size at once. The floor itself is a trade-off: it stops you selling into an empty book at a silly price, and it also means the stop may sell nothing when you most want out. Decide that before the market moves.
What a stop exit costs
A stop is a taker order, so it pays the taker fee where the category has one. The fee page gives the formula as shares × fee rate × p × (1 − p), with a rate of 0.07 for crypto markets. Selling 200 shares at $0.30 in a crypto market costs 200 × 0.07 × 0.30 × 0.70, or $2.94, on top of whatever the spread took. Rates differ by category and change over time, so check the current table. Our maker and taker fees guide has the longer version.
When an automatic exit will not fire
Stops on stock and crypto exchanges fail in a gap. Prediction markets gap more often, because news does not move prices a little at a time. A court ruling, a called race or a goal can take a share from 37 cents to 8 cents between two book updates. A stop at 30 cents does not sell at 30 in that case. It sells at whatever bids are left, or not at all if you set a floor above them. Plan your position size as if the stop will fail in exactly the event you bought it for.
A few other cases come straight from the docs:
- Matching engine restarts. During a restart, new orders are rejected. When the engine comes back it runs in post-only mode for two minutes: cancels work, but new orders must be maker orders. A stop sell is a taker order, so it cannot go through until that window ends. Polymarket says it announces planned restarts ahead of time, with about two days' notice when possible.
- Sports delay. On configured sports markets, marketable orders wait out a delay window during live play before matching, and an order cannot be cancelled while it waits.
- Taker delay on up/down markets. Selected crypto and finance up/down markets hold every marketable order for 250 milliseconds. In a 15-minute market that is a real cost, as we covered in Polymarket 15-minute crypto markets.
- Your watcher goes down. A stop that lives in a script on your laptop stops existing when the laptop sleeps. Hosting matters, and our notes on running a Polymarket bot 24/7 apply to any exit program.
If you write your own tooling, know what order heartbeats do. Once a program sends its first accepted heartbeat, it must keep sending one every five seconds; after ten seconds with none, the server queues a cancel-all for that API key, and there is no way to switch it off. That suits market makers. For a take-profit trader it means a crashed program takes its resting take-profit orders with it.
Setting levels in a market capped at $1
A share can never be worth more than $1.00 or less than $0. That changes how percentage targets behave. The most a Yes share bought at price p can gain is (1 − p) divided by p.
| Entry price | Most it can gain | Price for a 25 percent stop | Price for a 50 percent take-profit |
|---|---|---|---|
| $0.20 | +400% | $0.15 | $0.30 |
| $0.40 | +150% | $0.30 | $0.60 |
| $0.60 | +67% | $0.45 | $0.90 |
| $0.80 | +25% | $0.60 | Not reachable |
| $0.95 | +5.3% | $0.71 | Not reachable |
Read the bottom row twice. A buyer at 95 cents can make about five percent and lose everything, and if 71 cents ever comes, it usually comes in one jump. For high-priced entries, position size does more for you than a stop.
A few rules of thumb we use:
- Set the stop where the reason for the trade is wrong, not at a round percentage. If you bought because a candidate led the polls, the stop belongs at the price that implies the lead is gone.
- Keep the stop outside the normal spread and noise. A stop one tick below the bid in a market with a 4-cent spread will fire on nothing.
- Take-profit targets near 95 to 99 cents often never fill, because buyers there are few and the remaining upside is small. Selling at 90 and freeing the money can beat waiting weeks for resolution; our piece on how long resolution takes shows why that wait has a cost.
- Size the position so a failed stop is survivable (Kelly sizing, loss caps).
Exits when you copy another wallet
A copied position adds a second question: whose exit do you follow? There are three common answers, and each has a weak spot.
Mirror the leader's exits. When the wallet you follow sells, you sell. The weak spots: you sell after them at a worse price, the entry drift from copy trading slippage, only in reverse. Many wallets also sell in pieces, and some never sell at all because they hold to resolution or close risk by buying the other outcome instead. A mirror rule that only looks for sells will miss that last case.
Hold to resolution. Simple, and fee-free on the exit because winning shares redeem for $1.00. The weak spot is that you carry the full downside of every trade the leader has already given up on.
Your own stop and take-profit on each copy. This caps what any single copied trade can cost you, whatever the leader does. The weak spot is that you will sometimes stop out of a trade the leader holds and wins. That is the price of a cap.
Most people end up mixing them: mirror exits by default, with a stop as a backstop, and a total drawdown limit across all copies.
How Poly Syncer handles exits
Poly Syncer is a non-custodial copy trading tool. Your funds stay in your own wallet and there is no deposit address; the engine trades through a signed permission with limits you set and can revoke. For exits it gives you:
- A choice per trader: hold to resolution, mirror their exits, or auto-close at a target profit or loss. Poly Syncer never force-closes a copied position on its own.
- Stop-loss and take-profit levels set in basis points from your entry. The Started plan includes a basic stop-loss and take-profit; Pro adds the full stop-loss and take-profit controls.
- Server-side triggers, so the checks keep running when your browser and the panel are closed.
- A max-drawdown circuit breaker that pauses copying when losses pass a limit you set.
None of this removes the cases above. A gap still sells at the price the book gives, a restart still blocks taker orders, and leaders lose. The tool makes sure the exit you chose in a calm moment is the one that runs. You can check a wallet's history on the leaderboard before you copy it, compare plans here, and read the full setup in our Polymarket copy trading guide.
Frequently asked questions
Does Polymarket have a stop-loss order?
No. Polymarket's order types are GTC and GTD limit orders and FOK and FAK market orders, with an optional post-only flag. None of them waits for a trigger price. A stop-loss has to be run by software that watches the order book and sends a sell when your level breaks, or done by hand.
How do I set a take-profit on Polymarket?
Place a limit sell above the current price as a GTC order, or as a GTD order if it should expire before a known event. It rests on the book as a maker order, and makers pay no trading fee on Polymarket. Adding post-only stops it from filling as a taker if the price has already moved past your level.
Why did my low sell order fill immediately?
A sell priced at or below the highest bid is marketable, so it matches against the existing bids right away, starting at the best one. A sell at 30 cents when the bid is 38 cents sells now at 38 and lower, not later at 30. That is why a resting order cannot act as a stop-loss.
Can I have a take-profit and a stop-loss on the same shares?
Not as two resting orders. Open orders reserve the shares they would sell, and Polymarket limits each order to your balance minus what is already reserved. An automatic stop must first cancel the resting take-profit and then sell. If the take-profit partly filled, only the unfilled part can be cancelled.
Will an automated stop-loss always get me out at my price?
No. Prediction market prices often jump on news, so a stop can sell well below its level or not at all if you set a minimum price. Exits can also be held up during matching engine restarts, which allow only post-only orders for two minutes afterwards, and during sports delays. Size positions so a failed stop is survivable.
Sources
Polymarket documentation, accessed November 18, 2026: Place Orders (GTC, GTD, FOK, FAK and post-only behaviour, GTD one-minute security threshold and three-minute minimum); Order Lifecycle (marketable orders, taker delay and sports delay, cancellation of partial fills, maximum order size after reserved amounts); Manage Orders (cancel endpoints, order heartbeats, ten-second expiry); Matching Engine Restarts (two-minute post-only mode, advance announcements); Prices & Orderbook (midpoint display, last traded price when the spread is wider than $0.10); Fees (fee formula, makers never charged, crypto taker rate). The trade examples are illustrative, not data from a real wallet. Order rules and fee rates can change; check the documentation for current values.